Skip to main content

09A Hardware Specification

Based on the RUPA-RK3528-A2 Product Specification V1.0, released 2026-11-04. Specifications are subject to change; the official specification takes precedence.

Core​

ItemSpecification
CPURockchip RK3528, quad-core ARM Cortex-A53, ARMv8-A architecture with NEON/FPU and TrustZone security extension
GPUARM Mali-450, OpenGL ES 1.1 / ES 2.0, OpenVG 1.1
MemoryLPDDR3 1GB / 2GB / 4GB (default 2GB)
StorageeMMC 8GB / 16GB / 32GB (default 16GB)
OSAndroid / Debian / Buildroot / Ubuntu / Armbian

Display and Networking​

ItemSpecification
Display output1× HDMI 2.0, up to 4K@60Hz, HDCP 2.2
Ethernet1× Gigabit Ethernet (1000M), external PoE module supported
WirelessWi-Fi 6 (802.11 a/b/g/n/ac/ax) + Bluetooth
Antenna1st-generation IPEX connectors for Wi-Fi 2.4G + BT and Wi-Fi 5G

Interfaces and Expansion​

ItemSpecification
USB1× USB 2.0 HOST Type-A (480Mbps); 1× USB 2.0 OTG Type-A (480Mbps)
M.2M.2 M-Key 2280, PCIe 2.0 ×1 lane (5Gbps), 80mm card length reserved
TF cardSupported, SD 2.0 / SD 3.0
GPIO25× GPIO + debug UART (40-pin header, all GPIO at 3V3 level)
Audio3.5mm 3-pole TRS headphone jack, L/R output only, no MIC input
RTCSupported, 1.25mm 2P battery holder (CR2032)
PoE2.54mm 2×2 pin header, IEEE 802.3af/at (requires an external PoE PD to 5V module)
ButtonsRecovery (upgrade) / Maskrom buttons
IndicatorsPower / status LED (red + green)

Electrical and Environmental​

ItemSpecification
Power supplyType-C 5V / 2A (power input only, no USB data, no PD protocol)
Power consumptionMax 6W (without peripherals)
PCBA dimensions88.3 × 68.3 × 23 mm
Packing weight85g ± 5g
Operating temperature-20°C ~ 60°C
Storage temperature-20°C ~ 70°C
Operating humidity20–85% RH (non-condensing)
Storage humidity5–90% RH (non-condensing)

Mechanical Dimensions​

RUPA-RK3528-A2 board dimensions

For the PCBA 2D source drawing (DXF), contact technical support — see Downloads.